How to solve the problem that the paper appears in the printer
Paper jam is one of the most common faults and causes of laser printer. There are more paper clips in the printer, but it is not a big problem in most cases. Therefore, the paper clips after the fault do not need to rush into the printer. In fact, the solution is very simple. First open the printer cover, take out the toner box, then pull out the paper tray, and then remove the paper clip.
Although the paper is taken out of the folder, there are still paper clips sometimes. Therefore, in order to solve the paper jam problem, we should pay attention to the following problems:
1. If you forget to close the back of the printer slot cover, the printer will send out a paper clip message, but no paper will be clamped at this time; besides proper paper, you can also avoid the occurrence of faults.
2. If another sheet of paper may be too rough or too smooth or unsmooth to press on the corner of the metal clip of the carton, it is difficult for the paper to pass through the printer smoothly and cause the paper jam in the channel. Therefore, the selection and use of paper is also very important. It is better not to select the following 70g paper and poor quality paper for printing.